EU edition Online learning
BMS Pre-Commissioning Course — online, for the EU
A 4-day, 11-module online course that teaches the practical work between installation and commissioning of a building automation and control system: reading the drawings, proving every point, finding faults with a method and recording the result for handover.
At a glance
- 4 course days, 11 modules, studied at your own pace
- 12 months' access from first login
- Virtual fault-finding simulator included with the course (it is part of the paid course, not sold separately)
- Module-by-module knowledge checks, no final exam; certificate of completion based on the module assessments
- Delivered in English; vendor-neutral
Price
£1,295 per delegate (priced in pounds sterling, GBP).
Invoices are issued in GBP. VAT is applied according to your EU country and whether you buy as a business or a consumer; we confirm it on your invoice before you pay. Any euro figure you see from a card or bank is your provider's conversion.
How to enrol from the EU
Use the Enrol / Register interest (EU) button. It opens an email to bmsskillsacademy@gmail.com with a short form. We reply with your invoice and terms; once paid, we send you an invitation link to set your password and start.
Included with the online course
Virtual fault-finding simulator
Simulated BMS installations: a Day 2 hardwired pack and a Day 3 RS-485 / Modbus pack. Each scenario may have a hidden fault, or the installation may be healthy. Take meter readings, inject test signals, prove cables and work from the wiring drawing, then follow Identify → Prove → Verify → Restore → Record and get scored feedback.



The simulator is a paid part of the online course for enrolled delegates. It is not a public download. Simulator units are SI (°C, Pa), as used across the EU.
The four days
Day 1 · Modules 1–6
BMS Fundamentals, Drawings & Control Panels
Understand how a BMS (building automation and control system, BACS) is structured, identify control-panel components, understand BMS I/O, interpret drawings and apply the electrical principles required for safe pre-commissioning.
Day 2 · Modules 7–9
Hardwired Pre-Commissioning
Circuit tracing, electrical testing, fault finding and point-to-point verification of hardwired field devices: sensors, transmitters, digital inputs and modulating actuators. Practised online in the simulator's hardwired pack.
Day 3 · Module 10
RS-485 / Modbus Pre-Commissioning
Configure, connect, prove and fault-find an RS-485 / Modbus RTU field network from issued project information, practised online in the simulator's RS-485 / Modbus pack.
Day 4 · Module 11
Records & Close-Out
Produce commissioning records, defect reports and blocker records suitable for project handover, so points are only signed off when they are proven.
The 11 modules
| # | Module | Simulator |
|---|---|---|
| M1 | What Is a BMS? What a building management / building automation system monitors and controls, and how it relates to the mechanical and electrical services in a building. | No simulator |
| M2 | BMS Architecture How supervisors, networks, control panels, controllers, I/O modules, field devices and plant fit together, and how information and commands move through the system. | No simulator |
| M3 | Understanding BMS I/O Digital and analogue inputs and outputs, universal I/O, thermistor, 0–10 V and 4–20 mA signals, command versus status. | No simulator |
| M4 | Inside a BMS Panel Controllers, I/O modules, power supplies, terminals, relays, contactors, protection, Hand/Off/Auto, HMIs and wiring. | No simulator |
| M5 | Reading BMS Drawings Real control-panel drawing sets: legends, the panel/field demarcation line, terminal and relay references, cross-references and revisions. | No simulator |
| M6 | BMS Electrical Principles Safety and safe isolation, AC/DC, voltage, continuity, contacts, 24 V supplies, commons and references, 0–10 V, 4–20 mA and thermistors. | No simulator |
| M7 | Circuit Tracing Practical Tracing circuits between the panel and field devices from the drawing, and comparing the drawing with the installation. | Optional simulator practice |
| M8 | Electrical Testing & Fault Finding Practical Using a multimeter safely and systematically on BMS circuits and locating faults in the panel, field wiring or device. | Required simulator tasks |
| M9 | Field Device Point-to-Point Verification & Fault Diagnosis Temperature sensors, analogue transmitters, digital inputs, modulating actuators and structured fault diagnosis. | Required simulator tasks |
| M10 | RS-485 & Modbus Network Pre-Commissioning Configuring, connecting, proving and fault-finding Modbus RTU devices on an RS-485 network, from healthy networks to common faults. | Required simulator tasks |
| M11 | Commissioning Records, Defect Reporting & Blocker Management Completing records from the equipment and points schedules, recording defects and blockers, and knowing when a point can be signed off. | No simulator |
The full module outlines with learning outcomes are on the main online course page. EU-specific modules are listed on Planned EU modules.
What the online course does and does not do
Online learners don't carry out hands-on rig work or electrical testing. Completing the online course does not by itself establish practical competence or authorisation to work on electrical systems in any EU member state. Your employer and your national rules decide who may work on electrical installations.
Enrol from the EU
Email us to enrol or register interest. We reply with access details, invoicing (including VAT for your country) and the terms that apply, before you pay anything.
Enrol / Register interest (EU)
Opens an email to bmsskillsacademy@gmail.com with a short form to fill in. Already enrolled? Log in to the online course.
