EU edition  For engineers in Ireland, the Netherlands, Germany, the Nordics, Poland and across the EU. Course delivered in English · Go to the UK site

EU edition Online learning

BMS Pre-Commissioning Course — online, for the EU

A 4-day, 11-module online course that teaches the practical work between installation and commissioning of a building automation and control system: reading the drawings, proving every point, finding faults with a method and recording the result for handover.

At a glance

  • 4 course days, 11 modules, studied at your own pace
  • 12 months' access from first login
  • Virtual fault-finding simulator included with the course (it is part of the paid course, not sold separately)
  • Module-by-module knowledge checks, no final exam; certificate of completion based on the module assessments
  • Delivered in English; vendor-neutral

Price

£1,295 per delegate (priced in pounds sterling, GBP).

Invoices are issued in GBP. VAT is applied according to your EU country and whether you buy as a business or a consumer; we confirm it on your invoice before you pay. Any euro figure you see from a card or bank is your provider's conversion.

How to enrol from the EU

Use the Enrol / Register interest (EU) button. It opens an email to bmsskillsacademy@gmail.com with a short form. We reply with your invoice and terms; once paid, we send you an invitation link to set your password and start.

Included with the online course

Virtual fault-finding simulator

Simulated BMS installations: a Day 2 hardwired pack and a Day 3 RS-485 / Modbus pack. Each scenario may have a hidden fault, or the installation may be healthy. Take meter readings, inject test signals, prove cables and work from the wiring drawing, then follow Identify → Prove → Verify → Restore → Record and get scored feedback.

Simulator start screen showing scenario pack and scenario dropdownsSimulator wiring bench with panel, sensors and live BMS valuesSimulator multimeter reading next to the wiring bench

The simulator is a paid part of the online course for enrolled delegates. It is not a public download. Simulator units are SI (°C, Pa), as used across the EU.

The four days

Day 1 · Modules 1–6

BMS Fundamentals, Drawings & Control Panels

Understand how a BMS (building automation and control system, BACS) is structured, identify control-panel components, understand BMS I/O, interpret drawings and apply the electrical principles required for safe pre-commissioning.

Day 2 · Modules 7–9

Hardwired Pre-Commissioning

Circuit tracing, electrical testing, fault finding and point-to-point verification of hardwired field devices: sensors, transmitters, digital inputs and modulating actuators. Practised online in the simulator's hardwired pack.

Day 3 · Module 10

RS-485 / Modbus Pre-Commissioning

Configure, connect, prove and fault-find an RS-485 / Modbus RTU field network from issued project information, practised online in the simulator's RS-485 / Modbus pack.

Day 4 · Module 11

Records & Close-Out

Produce commissioning records, defect reports and blocker records suitable for project handover, so points are only signed off when they are proven.

The 11 modules

#ModuleSimulator
M1What Is a BMS?
What a building management / building automation system monitors and controls, and how it relates to the mechanical and electrical services in a building.
No simulator
M2BMS Architecture
How supervisors, networks, control panels, controllers, I/O modules, field devices and plant fit together, and how information and commands move through the system.
No simulator
M3Understanding BMS I/O
Digital and analogue inputs and outputs, universal I/O, thermistor, 0–10 V and 4–20 mA signals, command versus status.
No simulator
M4Inside a BMS Panel
Controllers, I/O modules, power supplies, terminals, relays, contactors, protection, Hand/Off/Auto, HMIs and wiring.
No simulator
M5Reading BMS Drawings
Real control-panel drawing sets: legends, the panel/field demarcation line, terminal and relay references, cross-references and revisions.
No simulator
M6BMS Electrical Principles
Safety and safe isolation, AC/DC, voltage, continuity, contacts, 24 V supplies, commons and references, 0–10 V, 4–20 mA and thermistors.
No simulator
M7Circuit Tracing Practical
Tracing circuits between the panel and field devices from the drawing, and comparing the drawing with the installation.
Optional simulator practice
M8Electrical Testing & Fault Finding Practical
Using a multimeter safely and systematically on BMS circuits and locating faults in the panel, field wiring or device.
Required simulator tasks
M9Field Device Point-to-Point Verification & Fault Diagnosis
Temperature sensors, analogue transmitters, digital inputs, modulating actuators and structured fault diagnosis.
Required simulator tasks
M10RS-485 & Modbus Network Pre-Commissioning
Configuring, connecting, proving and fault-finding Modbus RTU devices on an RS-485 network, from healthy networks to common faults.
Required simulator tasks
M11Commissioning Records, Defect Reporting & Blocker Management
Completing records from the equipment and points schedules, recording defects and blockers, and knowing when a point can be signed off.
No simulator

The full module outlines with learning outcomes are on the main online course page. EU-specific modules are listed on Planned EU modules.

What the online course does and does not do

Online learners don't carry out hands-on rig work or electrical testing. Completing the online course does not by itself establish practical competence or authorisation to work on electrical systems in any EU member state. Your employer and your national rules decide who may work on electrical installations.

Enrol from the EU

Email us to enrol or register interest. We reply with access details, invoicing (including VAT for your country) and the terms that apply, before you pay anything.

Enrol / Register interest (EU)

Opens an email to bmsskillsacademy@gmail.com with a short form to fill in. Already enrolled? Log in to the online course.